General Chromatography Products (133)

Compare Tool

Select up to 3 products

  • Thumbnail Image for Glass and PTFE Straight Adapters with Hose Connection

    Wilmad LabGlass

    These borosilicate glass adapters feature a 5/16" O.D. hose connection at top and Standard Taper 24/40 on bottom. With a stopcock between joints, model LG-1711 has a 2mm glass plug and LG-1711T has a 2mm PTFE plug.

  • Placeholder Image for Off-Set Adapters

    Wilmad LabGlass

    These borosilicate glass off-set adapters have a Standard Taper outer joint on one end and same size Standard Taper inner joint on the other.

  • Thumbnail Image for SYNTHWARE Vigreux Distilling Columns

    Kemtech America

    Column length is measured from the highest to lowest indent in the column.

  • Thumbnail Image for Synthware Distillation Connecting Adapters

    Kemtech America

    Synthware distillation connecting adapter. With standard taper top outer joint and inner joints at bottom and the side arm. Bottom and side arm joints are angled at 75 degrees to one another.

  • Thumbnail Image for Mineral Oil Bubbler Oil Adapters

    Kemtech America

    Synthware adapter with oil bubbler. With standard taper inner joint. Horizontal design allows for in line connection for apparatus purging.

  • Thumbnail Image for U-Shaped Adapters

    Kemtech America

    Synthware U-shaped adapter. With standard taper inner joints at both ends.

  • Thumbnail Image for PYREX® Claisen Three-Way Connecting Adapters

    Corning

    These PYREX® Claisen adapters have Standard Taper outer joints at the upper end and on the parallel sidearm and an inner Standard Taper joint at the lower end.

  • Thumbnail Image for Synthware Flushing Adapters

    Kemtech America

    Synthware flushing adapter is used to flush and fill attached vessels with an inert gas to provide protective storage. A ballon is connected to the top hose connection. An inert gas is connected to the side hose connection. The ballon can be expanded with inert gas at the same time as the vessel or...

  • Thumbnail Image for PYREX® Claisen Heads

    Corning

    These Claisen Heads are replacement parts for the 6949M series of PYREX® microchemistry kits (Thomas No. 0320H44).

  • Placeholder Image for Reducing Unions and Reducers

    Agilent Technologies
  • Thumbnail Image for Synthware Inert Gas Adapters with 2 Hose Connections

    Kemtech America

    Synthware Inert Gas Adapter has two hose connections 180 degrees from one another to provide a flow of inert gas over the apparatus. The joints are standard taper inner joints.

  • Placeholder Image for Active inlet valve,without cartridge

    Agilent Technologies
  • Thumbnail Image for Synthware Distillation Adapters with Threaded Thermometer Ports

    Kemtech America

    Synthware distillation adapter with threaded thermometer port. The threaded port will accommodate a 6-7.5mm O.D. plain thermometer. The adapter has standard taper top outer joint and inner joints for the bottom and side. All joints are the same size. 

  • Thumbnail Image for Foam-Type Distillation Traps

    Kimble

    Placed above a boiling flask to prevent foaming-type reactions from entering either the distilling column or the condenser. Useful with rotary evaporators 517000 features a more extensive baffle system than other traps Manufactured from 33 expansion, low extractable borosilicate glass conforming to...

  • Placeholder Image for Front and Back Ferrules

    Agilent Technologies
  • Thumbnail Image for Synthware Vacuum Filtration Adapters

    Kemtech America

    Used with plain stem Buchner funnels and pluro-stopper. Hose connector has an O.D. of 10mm at the largest serration. Joint is a standard taper inner joint. Pluro-stoppers are not included.

Compare Tool

Select up to 3 products

Open
Developer
Layout

Please Log In

Don't have a web profile? Create one now.