General Chromatography Products (46)

Compare Tool

Select up to 3 products

  • Thumbnail Image for SYNTHWARE Vigreux Distilling Columns

    Kemtech America

    Column length is measured from the highest to lowest indent in the column.

  • Thumbnail Image for Synthware Distillation Connecting Adapters

    Kemtech America

    Synthware distillation connecting adapter. With standard taper top outer joint and inner joints at bottom and the side arm. Bottom and side arm joints are angled at 75 degrees to one another.

  • Thumbnail Image for Mineral Oil Bubbler Oil Adapters

    Kemtech America

    Synthware adapter with oil bubbler. With standard taper inner joint. Horizontal design allows for in line connection for apparatus purging.

  • Thumbnail Image for U-Shaped Adapters

    Kemtech America

    Synthware U-shaped adapter. With standard taper inner joints at both ends.

  • Thumbnail Image for Synthware Flushing Adapters

    Kemtech America

    Synthware flushing adapter is used to flush and fill attached vessels with an inert gas to provide protective storage. A ballon is connected to the top hose connection. An inert gas is connected to the side hose connection. The ballon can be expanded with inert gas at the same time as the vessel or...

  • Thumbnail Image for Synthware Inert Gas Adapters with 2 Hose Connections

    Kemtech America

    Synthware Inert Gas Adapter has two hose connections 180 degrees from one another to provide a flow of inert gas over the apparatus. The joints are standard taper inner joints.

  • Thumbnail Image for Synthware Distillation Adapters with Threaded Thermometer Ports

    Kemtech America

    Synthware distillation adapter with threaded thermometer port. The threaded port will accommodate a 6-7.5mm O.D. plain thermometer. The adapter has standard taper top outer joint and inner joints for the bottom and side. All joints are the same size. 

  • Thumbnail Image for Synthware Vacuum Filtration Adapters

    Kemtech America

    Used with plain stem Buchner funnels and pluro-stopper. Hose connector has an O.D. of 10mm at the largest serration. Joint is a standard taper inner joint. Pluro-stoppers are not included.

  • Thumbnail Image for Synthware Vacuum Adapters with Glass Stopcocks, Straight

    Kemtech America

    Synthware vacuum adapter with a serrated hose connection 180 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.

  • Thumbnail Image for Synthware Enlarging Adapters

    Kemtech America

    Synthware enlarging adapters are used for connecting dissimilar standard taper joint sizes. The lower inner joint is smaller in size than the top outer joint.

  • Thumbnail Image for Synthware Flow Control Adapters with Metering Stopcock, 90°

    Kemtech America

    Synthware flow control adapter with metering stopcock. The serrated hose connection is turned 90 degrees to the standard taper inner joint. Provides on/off control with the main stopcock and precise control of liquids or gasses with the needle valve.

  • Thumbnail Image for Synthware Vacuum Take-Off Adapters with PTFE Stopcocks

    Kemtech America

    Synthware vacuum adapter with 2mm straight bore PTFE stopcock on the hose connection.The upper outer and lower inner standard taper joints are the same size.

  • Thumbnail Image for Synthware Distilling Adapters, 105°

    Kemtech America

    Synthware distillation adapter with sealed in drip tip. Adapter is bent at 105 degrees. Standard taper top outer joint and lower inner joints. 

  • Thumbnail Image for Synthware Vacuum Take-Off Adapters with Glass Stopcocks

    Kemtech America

    Synthware vacuum adapter with 2mm straight bore glass stopcock on the hose connection.The upper outer and lower inner standard taper joints are the same size.

  • Thumbnail Image for Synthware Vacuum/Inert Gas Adapters, 90°, Outer Joint

    Kemtech America

    Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection is at a 90 degree angle to the standard taper outer joint.

  • Thumbnail Image for Synthware Bushing Adapters

    Kemtech America

    Synthware bushing adapters allow for compact assemblies of dissimilar standard taper joints.

Compare Tool

Select up to 3 products

Open
Developer
Layout

Please Log In

Don't have a web profile? Create one now.